星空外围线上网站

Pharmaceutical Machine

[  HOME  ]
PRODUCT PROFILE  ]
  ]

  

  

  

 

Home>Main Products>Blister Packing Series


KDB-120 Automatic Blister Packaging Machine (ALU-ALU)

ALU/PVC Blister Packing Machine


Alu/Alu blister packing machine KDB-120ALU(Automatic Blister Packing Machine) is specially designed for the ALU/ALU product for the purpose of better preservation and prevention of light rays. KDB-120ALU has similar features with KDB-120 except it's formed by cold extruding. It can also pack ALU/PVC's product.

 

Applicable industryPharmacy, Biotechnology, Health Supplements, Nutritional Supplements, natural food…etc.

FLOW CHART
PTP Blister Packing Process
KDB MACHINE
Sealing Line (cross-net type)
  TRADITIONAL MACHINE
Sealing Dot (plate type)
KDB Machine
TRADITIONAL Machine
Cross-net type roller,due to crossed net sealing is capable of blocking the air completely and prolonging medicine preservation about 4 times over plate type sealing.
The cross-net type roller is composed of two rollers compressed in a single line with a very small contact area preventing hot air from getting into the blister pockets,so medicine effectiveness is unaffected.
  Dot type (plate-type)
Plate type uses dot-type sealing:air gets into the medicine where there aren't dots and thus shortens expiration.
Since the sealing area is larger and sealing time longer, during the sealing process, hot air easily gets into the blister pockets. This decreases the effectiveness of the medicine.
Cutting Method
   
Cutting Method
 
The machine adopts a no waste cut method, so no wasted material is
produced. It can save
about 1/5 of material compared to traditional types.
  Plate-type of triming wastes about 3-5 mm of material between two blister and increases cost at the same time.

OPTION
Automatic Feeding Device For Capsule & Tablet:
Automatic orientation device for capsule (capsule only):
 
Automatic Feeding Device For Capsule & Tablet:
The capsule or tablet can be filled 100% automatically into blister pocket by  vibrating feeder.
Brush Box feeder
Miss-Feeding Detecting System:
Automatic orientation device for capsule (capsule only):
Automatically fill the two
piece hard capsule into the blister pocket at same
direction by capsule
 orientation structure.
Brush Box feeder
Easy to feed all diffent
kinds of products into the  blister pocket with brushes.
Miss-Feeding Detecting System:
Capable of detecting
miss-feeding blister by
detecting system.
SIZE CHANGE PARTS
SIZE CHANGE PARTS

FEATURES:
1.
Compact size with all function and fast production.
2.
Compressed air forming creates equivalent blister pocket.
3.
Continuous motion offers best filling condition.
4.
Equipped with trouble detection system which displays where the trouble is.
5.
The machine adopts a no waste trimming method to save material.
6.
It is very easy to exchange all the size change parts. It takes less than 30 minutes to finish.
7.
Main frame is covered with stainless steel. This makes it easier to clean and meets cG.M.P. standard.
8.
It is neither noise nor creates public hazards and it is easy to operate.
9.
The expiration is about 4 times longer than traditional dot-type sealing.
 

TECHNICAL DATA

 Model

 KDB-120

KDB-120ALU

 Output

 Max. 200 blisters/min

Max. 100 blisters/min

 Forming/Material Width

 Max.140 mm

 Forming Depth

Max.12mm

Max.9mm

 Formed Area Available

 Max.146 x 125mm

 Reel Diameter

 Forming Material

 Max. Φ 400mm

 Lidding Material

 Max. Φ 240mm

 Reel Core

 Φ 70 ~ Φ 76mm

 Power Supply

 220V/380V 50HZ/60HZ 1 phase

 Power Consumption  7.2 KW  8 KW
 Air Consumption  6 kgf/cm² , 75 ∫/min
 Forming Materials  PVC, PVC/PVDC
 PVC/ACLAR, PP

 Aluminium laminate,PVC,PP,

 PVC/PVDC,PVC/ACLAR,

 Lidding Foil

 ALU/HARD,ALU/SOFT,ALU/PAPER,

ALU/POLYESTER,PP

 Machine Size (LxWxH)  260x95x200 (cm)
 Packing size (LxWxH)  285x115x175 (cm)
 Gross Weight  1400kgs
 Net Weight  1000kgs

◎ The specification, appearance and dimensions shall be subject to change without prior notice.
◎ Other KD machine series please browse our website check to detail.

 

   
[ ]
[ Home ]

 


(Try this webside)

If you don't know which machine you need ↑↑

E-mail: kd033512@gmail.com  We'll reply your enquiry within 24hrs.

TEL:886-2-29713333,886-2-29818888 FAX:886-2-2982-6645